Insulation material manufacturer: Explain the influencing factors and storage methods that affect the service life of nano insulation boards

Insulation material manufacturer: Explain the influencing factors and storage methods that affect the service life of nano insulation boards

Nano insulation board is a new type of refractory insulation material that can keep the isolation distance lower than the mean range of vapor molecules. Isolation is a closed porosity close to the vacuum pump, which can effectively block the thermal motion of vapor molecules.

What are the factors that can affect the lifespan of the nano insulation board?

1. Product Quality

Looking at the sales market, I found that the product's appearance design is similar, but the prices are different. Different manufacturers and brands have varying performance parameters. Some resin boards look both shiny and cheap on the surface. Some businesses add a lot of oil soluble additives to the composition ratio of the ingredients, which makes the surface of the board very smooth. After outdoor exposure, the ingredients are very prone to sedimentation, resulting in poor quality and aging.

2. Usage scenarios

The insulation foam board of the insulation layer is subject to different types of external influences, which will seriously affect the service life of the resin board. In some regions, acid and alkali corrosion is relatively strong, and the service life will also be relatively reduced.

3. Construction technology

Due to resource issues after installation and construction of resin boards, some users lack experience in the construction team and sometimes assemble them themselves to control costs, resulting in incorrect construction of resin boards and short application cycles. When laying resin boards, experienced professional technicians must be hired.

4. This is related to the usage of ASA epoxy resin on the surface and the co extrusion process

When selecting resin material boards, one should consult with a reputable manufacturer or producer of nano insulation boards. Never buy things that are too cheap. The cost of resin material control panels is very high.

Insulation material manufacturer: Storage method of nano insulation board

1. Never soak in water, store in a room to prevent outdoor accumulation.

2. The room should be dry, naturally ventilated, and free of corrosive substances. It must be placed in a place where condensation is very easy and there is a significant temperature difference between hot and cold. When storing outdoors temporarily, a square wooden pillow should be used as a cushion block below, and good natural ventilation should be taken into account. Choose a flat road surface, and the top of the cushion block should be neat, so that the thick steel plates can be stacked at the same relative height to avoid expansion and contraction. The product should be covered with waterproof fabric to avoid immediate exposure to the sun and rain.

3. If the product is soaked in rain or condensed water, the outer packaging should be opened immediately, quickly dried to remove moisture, and quickly applied.

4. It must be stored in its factory condition without stacking to prevent damage to the coating.