Thermal insulation material manufacturer talks about the use method of foam glass plate

Thermal insulation material manufacturer talks about the use method of foam glass plate

During the construction of foam glass panels, the safety operation procedures and methods shall be strictly followed, and the full set of operation methods shall be reasonable according to the effective operation and use. To clean the ash layer and cement mortar on the surface of the infill wall, remove the protruding objects on the surface of the columns and beams, and use specialized putty powder to horizontally cover the wall surface and the longitudinal joints between the wall surface and the beam body. Architecture column. The foam glass plate is bonded with a special adhesive, and the standard thin and thick foam plastic glass tea cup is pasted on the engineering wall foot as the control "screed", and the level control line is pulled out.

The basic solid layers of the foam glass panel wall insulation system shall be respectively: adhesive layer, foam glass panel insulation layer, protective layer and decorative layer from the inside to the outside. Among them, the adhesive is mainly used to carry out ground leveling for the wall base to ensure that the glass foam meets the wall firmly. The surface protective layer is mainly used to maintain and strengthen the robustness of the insulation system and prevent leakage.

After the glass foam insulation board is pasted, anchor the foam glass board reinforcement and apply a layer of crack resistant cement mortar. When brushing the surface of cement mortar, pay attention to evenly applying crack resistant cement mortar from one direction to another. After the completion of the overall surface coating, the dripping lines of the window should be treated, and the painting construction of the anti cracking cement mortar overall surface layer artistic decoration overall surface layer should be carried out. The all ceramic veneer of the decorative brick should first be treated with the window of the window, and then coated with adhesive mortar as a whole surface layer for artistic decoration.

Thermal insulation material manufacturer talks about the structural characteristics of glass foam insulation board

Glass foam insulation board is a new material made of laminated glass foam material. There are many bubbles in the internal structure. This structure reasonably insulates the dispersion in the air and the fluidity of its acoustic frequency. Therefore, this raw material will also be used for the exterior wall, and foam glass board raw material will also be used for the noisy living environment.

Glass foam insulation board contains 99% inorganic glass, so it will not age, is not easy to carbonize, is relatively easy to laser cut and form, and the construction is simple. The chemical performance of foam glass plate is stable. This feature can be applied to a variety of harsh environments, making it convenient for engineering construction selection. Moreover, this structural feature can better bring some very typical ways and can be better used.

The internal bubble structure of glass foam insulation board leads to the advantages of light weight and high strength, which makes it suitable for the construction of multi-storey buildings. Moreover, it has a special feature of stability, long service life in buildings and no deformation. It also has 100% internal muscle bubble structure, which depends on its fire prevention and waterproof characteristics. Therefore, foam glass board is a long-term thermal insulation material, suitable for internal and wall insulation. The foam glass plate can deal with the building fire prevention specification, heat insulation and moisture-proof at one time, bringing reliable solutions.